How to Install a Ghost Immobiliser
A ghost immobiliser protects your vehicle from key cloning and hacking. It works by stopping the engine from running until it is activated using a PIN code, which can be up to 20 characters long.
This additional layer of security isn't visible to thieves who may not be expecting it. Certain systems come with an app that allows the owner to disarm their immobiliser if they forget their PIN or utilize the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an advanced security system that can be incorporated into your vehicle's ECU offering a secure protection against thieves. It is highly effective and user-friendly, making it a valuable addition to your vehicle's security arsenal. Like all anti-theft devices it's not foolproof and requires regular maintenance in order to function properly. This guide will help you make the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with each other over short distances without the need for central control units. It is designed to allow multiplexing of electrical wiring in vehicles to save on copper and offers a range of advantages, such as low cost and ease of use.
In the majority of modern cars In modern cars, the CAN protocol is used to communicate with a variety of systems, including the engine management system (EMS), transmission controller, steering module air conditioning controls, and many more. It also transmits sensor data, such as speed sensors, as well as other inputs, to control the various features of the car. The CAN bus is used to monitor these different components, and it can stop a vehicle from starting if they are in a dangerous state.
While the CAN bus could be employed for a variety purposes, it's important to know how it functions and how it's secured. The CAN bus is an excellent way to enhance the features of your vehicle, but it's also essential to protect it from threats such as hackers and other. Installing a firewall and monitoring your CAN-bus with software is the best way to do this.
Ghost2's control unit is concealed inside the car's wiring harness or dashboard, removing the possibility of a burglar physically tampering with it. It is also impossible to reset a PIN code or emergency code without having access to the car.
If you must give your car away for servicing, valet parking, or any other reason, you can turn on the Transport Mode. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only be activated after the vehicle has travelled 31 mph for a period of 15 minutes.
How do I create a PIN code
The Ghost immobiliser shields your vehicle from thieves. The latest technology utilizes the PIN code to disable the engine and block it from starting without the correct code or an authorized fob/mobile device. The system's discrete design makes it virtually invisible and also provides unbeatable security against theft. Furthermore, the system is TASSA certified and can provide significant savings on car insurance premiums.
During the installation, Ghost enters a "learning mode" to record the sequence of buttons that are pressed in order to create unique pin codes. The installer will guide you through activating the system once the pin code is created. Once activated it will Ghost system will disable the starter motor of your vehicle until a valid pin code is entered or the vehicle is switched into transport mode. This makes it very difficult for thieves to clone or hack your vehicle's starting system.
It is simple to install an easy-to-install Ghost immobiliser, but you must follow the precise instructions included in the user guide to ensure the proper operation. Basic hand tools can assist in making accurate connections and a multimeter will aid in checking electrical values. Insulation tape, heat shrink tubing, and cable ties can be used to protect exposed wiring. Test the system on regularly basis to detect any potential problems.
After the installation is completed it is crucial to perform a final check of the system before switching on the ignition of your vehicle. Ghost immobilisers are able to rearm themselves after 3 to 30 seconds dependent on the model of your vehicle. The system also has the option of a Service/Valet mode, which allows you to temporarily remove the system for servicing your vehicle or valet parking.
The immobiliser can be hidden under the dashboard or on the steering wheel. It is recommended to use a small bit of duct tape or paint to mark the CAN H and L wires so that you can easily identify the wires during testing. The CAN H and L wires should be connected to an electrical source that provides continuous 12V. It is important to check the connections after testing because an the incorrect identification of these wires may cause the system to malfunction.
Invoking the system
A ghost immobiliser blocks your vehicle from starting unless you press a set of buttons inside the vehicle generally the steering wheel, door panel, or central console. The sequence is determined by the user and is able to be changed as needed. Once activated, the system will not be turned off. This makes it an ideal choice for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable, meaning it can't be detected by modern diagnostic tools or code-grabbing technology. It does not emit radio frequencies making it even more difficult for thieves detect.
If the device is detected, it will prevent the engine from running and sound an alarm with a loud sound to scare off thieves. The device can be used to track the location of the vehicle and help police recover it when it is stolen.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in an immobiliser that is ghost-like. We are fully trained to install a ghost immobiliser on your vehicle, and will make sure that it is tucked away in a hard-to-reach area. We can also provide additional security measures, such as an ignition lock for your wheel and a kill switch to keep your car safe from thieves.
Disarming the system
It's important to understand how to deactivate a Ghost immobiliser if it is installed on your car. This will help you in the case that you lock your keys inside the car or your battery dies. ghost immobiliser review utilizes a unique PIN code, which only you know. It won't be able to start the car without this code. The most efficient method of entering the code is to press a combination of buttons on your dashboard or the steering wheel. This is a simpler method than using the key fob, and also stops anyone from copying your remote.
Unlike some aftermarket immobilisers that require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to operate. Its most notable feature is that it shuts off the engine, without affecting normal functions of the vehicle. This makes it extremely difficult for thieves to use signal boosters or duplicate keys to car keys. ghost immobiliser problems does not emit radio frequencies, which means thieves cannot detect it.
The Ghost system also comes with an option called Transport Mode that allows you to temporarily disable the security system for occasions like transportation or servicing. This feature is an excellent option if you have to lend your vehicle to a person who isn't sharing the PIN code, or when you wish to keep your vehicle secure while driving it. Press the button five times within two seconds to enable Transport Mode. The Ghost system will confirm activation with five indication signals.
Save the emergency code in your vehicle in a secure location. If you ever find yourself locked out of your car You can call the technician or company who installed the system, and they will give you the code. If you cannot reach them You can always attempt to contact an authorized dealer however this will require verification procedures and may incur additional charges.
Apart from the ease of this system, you can depend on it to safeguard your car against theft and help reduce the cost of insurance. Insurance companies often offer reduced monthly rates or even financial incentives for installing this anti-theft device.